NomOusse Pro Kit 18x2.15” Enduro Tubeless (D)

Nomousse PRO 18 x 2.15″ tubeless kit for enduro rim. Contains 1 x Nomousse PRO tire, 1 x protective rim tape, 1 x valve protection ring and 1 x inner tube.

With Nomousse PRO
you’ll have the best combination of
traction, safety against flats,
light-weight, and tire lifespan.
In addition, it protrudes 27 mm from the rim, providing maximum protection against impacts and becoming an excellent emergency run-flat system.

Nomousse is extemely tough, with flexible, non-elastic, Kevlar rings (2 x stronger than steel), and reinforced meshes.
Easy to assemble by hand.

Recommendations for use:
The range of use is 50 to 90 psi. We recommend 60 to 75 psi for normal use and 75 to 90 psi for super enduro and extreme use. To reduce friction and prevent displacement, you must put 150 cc of water-based gel between the offroad tire and the Nomousse. Also, 50 cc of gel can be put in the internal chamber.

IT IS IMPORTANT NOT TO APPLY SIDE PRESSURE TO THE VALVES, with the bead breaker or with the offroad tire. To mount it properly, you must end fitting the offroad tire at the valves zone. When disassembling the offroad tire, start on the opposite side and finish removing it through the valve area, without removing the Nomousse.

The Nomousse must be naturally centered with the offroad tire and the rim. If after inflating the Nomousse and the offroad tire in its position, you appreciate the rubber-covered valve is not positioned correctly, deflate and bounce the wheel against the ground, with the valves up. Inflate again.